EMC Specialist - Platform Engineer, PowerStore - DES-1241무료 덤프문제 풀어보기

A. Discovery Utility

B. Data Collect using Service Container

C. Data Collect using vCenter

D. USB stick inserted into the system

A. Standard, NVP, CSV and JSON

B. Table, NVP, CSV and XLS

C. Table, NVP, CSV and JSON

D. Table, XLS, CSV and JSON

A. 10 GigE SFP optical cable

B. 100 GigE QSFP28

C. 25 GigE Twinax

D. 10 GigE Cat 6 Ethernet RJ-45

A. power LED: blinking green fault LED: off

B. power: LED: steady green fault LED: off

C. power LED: blinking green fault LED: blue

D. power LED: steady green fault LED: amber

A. root

B. console

C. service

D. admin

A. The new appliance cannot be added to the cluster; appliance model and type must match when clustering appliances together

B. Additional VLTi links on the ToR switching must be configured for the 9000T to support the increased inter-switch network load

C. Add the new 9000T appliance into the cluster per the procedure; mixed models of the same type are supported

D. Remove two of the four NVMe NVRAM drives from the 9000T the caching configuration of all clustered appliances must match

A. Ports 1/1/55 and 1/1/56 are added to a new LACP domain

B. Ports 1/1/55 and 1/1/56 are added to the VLTi domain

C. Interfaces are configured for remote replication traffic

D. Interfaces are configured for PowerStore discovery traffic

A. Static IP: 169.254.1.249 and netmask: 255.0.0.0

B. Static IP: 128.221.1.249 and netmask: 255.255.255.0

C. Leave IP address and netmask unconfigured

D. Obtain IP address from DHCP on PowerStore

A. SAS bus link down

B. SAS bus link up

C. Expansion enclosure power-on

D. Expansion enclosure faulted

A. Cluster, Appliance

B. Appliance, Appliance

C. Cluster, Cluster

D. Appliance, Cluster