[2026] Microsoft Windows Embedded Standard 7 for Developers

문제1

You are creating a Windows Embedded Standard 7 image for a target device. You plan to use a new hardware platform for the device. You need to import the devices hardware information into Image Configuration Editor (ICE). You also need to minimize the amount of information you are importing. What should you do?

A. Start the target device with MS-DOS and execute the TAP.exe tool.

B. Start the target device by using WindowsPE and execute the lmageX.exe tool.

C. Start the target device by using WindowsPE and execute the TAP.exe tool.

D. Start the target device with retail Windows and execute the lmageX.exe tool.

정답: C

문제2

You are creating an answer file for a Windows Embedded Standard 7 image by using Image Configuration Editor (ICE). You add all functional packages required by the device specification. You need to ensure that the answer file creates an image that will work as required by the device specification. What should you do in ICE?

A. Resolve package dependencies.

B. Insert the SOEMS folder path.

C. Create a configuration set.

D. Use the Static Dependency Analyzer tool.

정답: A

문제3

You are deploying a final and resealed Windows Embedded Standard 7 Windows Image (WIM) file to a target device. You need to create a bootable DVD to automatically deploy the WIM file to the target device. What should you do?

A. Use the HD2ISO.exe tool to create an ISO file that contains the WIM file, the ImageX tool, and an edited Boot.ini file to deploy the WIM file. Burn the ISO file on a writable DVD

B. Create a WindowsPE image by using Image Configuration Editor (ICE). Change the startnet file from WindowsPE to use the lmageX.exe tool to deploy the WIM file. Use the oscdimg.exe tool to generate a bootable ISO file. Burn the ISO file on a writable DVD .

C. Create a WindowsPE image by using Image Configuration Editor (ICE). Change the bootcfg file from WindowsPE to use the lmageX.exe tool to deploy the WIM file. Use the oscdimg.exe tool to generate a bootable ISO file. Burn the ISO file on a writable DVD .

D. Use the HD2ISO.exe tool to create an ISO file that contains the WIM file, the ImageX tool, an ntldr file, and an edited Boot.ini file to deploy the WIM file.Burn the ISO file on a writable DVD .

정답: B

문제4

You are developing a Windows Embedded Standard 7 image for a device. The device does not have sufficient RAM to run a custom version of WindowsPE. The device has a DVD drive but does not have USB or networking capability. You need to configure WindowsPE to run on the device. What should you do?

A. Create a second partition on the devices hard disk drive. Ensure that the partition is large
enough to include the WindowsPE image.
Copy the image to the partition.

B. Use the BCDEdit tool to modify the boot configuration database so that WindowsPE will
start directly from the DVD .

C. Create a page file that is large enough to include the WindowsPE image on the hard disk.

D. On a target device that has sufficient memory, start WindowsPE with the Profiling option
enabled. Perform the specific tasks used for maintenance. Create a new WindowsPE image
by using the profile.

정답: B

문제5

You are creating a Windows Embedded Standard 7 image for a target device. You have a 32bit device driver designed for the retail version of Windows XP. The device driver must be used in the image. The driver has been verified to work on Windows 7. You need to ensure that the image will support the Windows XP driver on the device. What should you do?

A. Use the Select Distribution Share option to select an x86 distribution share.

B. Add a new OEMFoldersPath entry to EmbeddedEdition_x64 and configure its settings to point to the driver.

C. Use the Select Distribution Share option to select an x64 distribution share.

D. Add a new OEMFoldersPath entry to EmbeddedEdition_x86 and configure its settings to point to the driver.

정답: A

문제6

You are creating an answer file for a Windows Embedded Standard 7 image by using Image Configuration Editor (ICE). You attempt to save the answer file. You receive an error message stating that the answer file contains validation errors. You need to resolve the error. What should you do?

A. Add a synchronous command to the Specialize configuration pass.

B. Examine the error messages in the Validation tab. Open each error message and resolve package dependencies.

C. Insert the SOEMS folder path in ICE.

D. Run the Static Dependency Analyzer tool and add mapped dependencies to the answer file.

정답: B

문제7

You are developing a Windows Embedded Standard 7 image for a target device. The device has an unformatted hard disk. You need to automate the process of configuring the hard disk during the installation of the operating system image in the device. What should you do in Image Configuration Editor (ICE)?

A. During the WindowsPE pass, specify the sequence of instructions for the Diskpart tool.

B. Suppress the Ul dialog boxes for the Imagelnstall setting. Then, set the InstallToAvailablePartition setting to True.

C. During the WindowsPE pass, specify the sequence of instructions for the lmageX.exe tool.

D. Specify the disk and partition number. Then, set the WillShowUI settings to Never.

정답: A

문제8

You are updating a Windows Image (WIM) file for a Windows Embedded Standard 7 device. You have three packages named SysPackagel. SysPackage2, and SysPackage3. Each package has installation dependencies. You need to update the image by using the packages. What should you do?

A. Mount the image by using the DISM tool. Create an answer file that contains the required packages. Apply the packages by using the DISM /lmage:<image file path> /Apply_Unattend:<path to unattend.xml> command. Dismount the image and commit the changes.

B. Use WindowsPE and the lmageX.exe tool to install the image on a target device.Apply the packages by using the DISM /online /Add-Package/PackagePath:" SysPackagel"/PackagePath:" SysPackage2"/PackagePath:" SysPackage3" command.

C. Mount the image by using the DISM tool. Add each packages files and folders to the appropriate location by using Windows Explorer.Dismount the image and commit the changes.

D. Mount the image by using the DISM tool. Apply the packages by using the DISM /lmage:<image file path> /Add-Package /PackagePath:" SysPackagel"/PackagePath:"SysPackage2"/PackagePath:"SysPackage3"
command. Dismount the image and commit the changes.

정답: A

Microsoft Windows Embedded Standard 7 for Developers - 070-582무료 덤프문제 풀어보기

우리와 연락하기

유용한 링크

최신 업데이트