CheckPoint Check Point Certified Security Expert - R81.20 - 156-315.81.20무료 덤프문제 풀어보기

A. In the SmartConsole / Gateways & Servers -> select Cluster Properties / Network Management and define two Sync interfaces per node. Connect both Sync interfaces without using a switch.

B. Use a group of bonded interfaces. In the SmartConsole / Gateways & Servers -> select Cluster Properties / Network Management and define a Virtual IP for the Sync interface.

C. Use a group of bonded interfaces connected to different switches. Define a dedicated sync interface, only one interface per node using the SmartConsole / Gateways & Servers -> select Cluster Properties / Network Management.

D. In the SmartConsole / Gateways & Servers -> select Cluster Properties / Network Management and define two Sync interfaces per node. Use two different Switches to connect both Sync interfaces.

A. In CLISH run: set interface eth2 mac-addr 11:11:11:11:11:11

B. In CLISH run set interface eth2 hw-addr 11 11 11:11:11 11

C. In expert-mode run: ethtool -4 eth2 mac 11 11:11:11:11:11

D. In expert-mode run ifconfig eth1 hw 11:11:11:11 11 11

A. 1) Upgrade the passive node M2 to R81.20 2) Enable the MVC mechanism on the upgraded R81.20 Cluster Member M2 ttcphaconf mvc on 3) In SmartConsole, change the version of the cluster object 4} Install the Access Control Policy 5) After examine the cluster states upgrade node M1 to R81.20 6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy upgrade the passive node M2 to R81.20

B. 1) Enable the MVC mechanism on both cluster members #cphaprob mvc on 2) Upgrade the passive node M2 to R81.20 3) In SmartConsole. change the version of the cluster object 4) Install the Access Control Policy 5) After examine the cluster states upgrade node M1 to R81.20 6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy

C. 1) Enable the MVC mechanism on both cluster members #cphaprob mvc on 2) Upgrade the passive node M2 to R81.20 3) In SmartConsole. change the version of the cluster object 4) Install the Access Control Policy and make sure that the installation will not stop if installation on one cluster member fails 5) After examine the cluster states upgrade node M1 to R81.20 6) On each Cluster Member, disable the MVC mechanism

D. 1) In SmartConsole. change the version of the cluster object 2) Upgrade the passive node M2 to R81.20 3) Enable the MVC mechanism on the upgraded R81.20 Cluster Member M2 Wcphaconf mvc on 4) Install the Access Control Policy and make sure that the installation will not stop if installation on one cluster member fails 5) After examine the cluster states upgrade node M1 to R81.20 6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy SmartConsole. change the version of the cluster object

A. Using Mgmt_cli tool

B. Using CLISH

C. Events are collected with SmartWorkflow from Trouble Ticket systems

D. Using Web Services

E. Using SmartConsole GUI console

A. Access Control policy unifies the Firewall, Application Control & URL Filtering, Data Awareness, and Mobile Access Software Blade policies.

B. Time object to a rule to make the rule active only during specified times.

C. The rule base can be built of layers, each containing a set of the security rules. Layers are inspected in the order in which they are defined, allowing control over the rule base flow and which security functionalities take precedence.

D. Limits the upload and download throughput for streaming media in the company to 1 Gbps.

A. The plug-in is a package installed on the Security Gateway.

B. Using a plug-in offers full central management only if special licensing is applied to specific features of the plug-in.

C. Installing a management plug-in requires a Snapshot, just like any upgrade process.

D. A management plug-in interacts with a Security Management Server to provide new features and support for new products.

A. cpview -f <timestamp>

B. cpview -d <timestamp>

C. cpview -e <timestamp>

D. cpview -t <timestamp>

A. Application Library

B. AppWiki

C. CPApp

D. Application Dictionary

A. Application Control

B. Firewall

C. URL Filtering

D. Identity Awareness

A. Security Gateway failover as well as Security Management Server failover is an automatic procedure.

B. Security Gateway failover is a manual procedure but Security Management Server failover is an automatic procedure.

C. Security Gateway failover as well as Security Management Server failover is a manual procedure.

D. Security Gateway failover is an automatic procedure but Security Management Server failover is a manual procedure.

A. new host name "New Host" ip-address "192.168.0.10"

B. add host name "New Host" ip-address "192.168.0.10"

C. create host name "New Host" ip-address "192.168.0.10"

D. set host name "New Host" ip-address "192.168.0.10"

A. Global tests and Object-based tests

B. Tests conducted based on the loC XMfcfile and analysis of SOLR documents

C. Policy-based tests and Global properties

D. Access Control policy analysis and Threat Prevention policy analysis

A. SOLR

B. fwm

C. DBSync

D. API Server