VMware vSphere 8.x Advanced Design - 3V0-21.23무료 덤프문제 풀어보기
An architect is designing a vSphere-based private cloud solution to support the following customer requirements:
The solution should support running 5,000 concurrent production compute workloads across the primary and secondary sites.
The solution should support running 1,000 development compute workloads within the secondary site.
The solution should support up to 50 management workloads across the primary and secondary site.
The solution must ensure the isolation of virtual infrastructure management operations between management and compute workloads.
The solution must ensure that hosting of any virtual infrastructure management workloads does not impact the amount of capacity available for compute workloads.
The solution must ensure that all production compute workloads are physically isolated from development compute workloads.
The solution must ensure that the operational management of compute workloads in the secondary site is possible in the event of a disaster affecting the primary site.
A combination of which four design decisions should the architect make to support the requirements?
(Choose four.)
The solution should support running 5,000 concurrent production compute workloads across the primary and secondary sites.
The solution should support running 1,000 development compute workloads within the secondary site.
The solution should support up to 50 management workloads across the primary and secondary site.
The solution must ensure the isolation of virtual infrastructure management operations between management and compute workloads.
The solution must ensure that hosting of any virtual infrastructure management workloads does not impact the amount of capacity available for compute workloads.
The solution must ensure that all production compute workloads are physically isolated from development compute workloads.
The solution must ensure that the operational management of compute workloads in the secondary site is possible in the event of a disaster affecting the primary site.
A combination of which four design decisions should the architect make to support the requirements?
(Choose four.)
정답: A,B,F,G
설명: (Fast2test 회원만 볼 수 있음)
An architect is reviewing the security and compliance requirements for a new application that will be hosted on a vSphere 8 environment.
The following information has been noted about the new application:
The application stores and processes confidential data
The supporting virtual infrastructure is shared with other departments
No other application stores or processes confidential data
The application virtual machines must be able to run on any ESXi host in the cluster The storage layer is a iSCSI attached SAN Data at Rest Encryption is in place for each presented LUN validated to FIPS 140-2 No budget is available for additional infrastructure components or software Application data must not be accessible outside of the application's virtual machines The architect has been tasked with providing a secure virtual machine design to host the application.
Which three design elements must the architect include to meet the requirements? (Choose three.)
The following information has been noted about the new application:
The application stores and processes confidential data
The supporting virtual infrastructure is shared with other departments
No other application stores or processes confidential data
The application virtual machines must be able to run on any ESXi host in the cluster The storage layer is a iSCSI attached SAN Data at Rest Encryption is in place for each presented LUN validated to FIPS 140-2 No budget is available for additional infrastructure components or software Application data must not be accessible outside of the application's virtual machines The architect has been tasked with providing a secure virtual machine design to host the application.
Which three design elements must the architect include to meet the requirements? (Choose three.)
정답: A,B,F
An architect is tasked with an application migration to a new VMware Cloud platform. The application service owner assistance from the architect to identify the technical requirements of the application.
The following has been made available following initial discussions:
A VMware Aria Operations report containing current resource usage
The output from a planning session including a roadmap for planned service growth A service dependency map from the company's IT operations management tool The desired consolidation ratio for the target platform is 10:1 The applications hosting budget is reducing by 10% Which two contain the technical requirements of the application? (Choose two.)
The following has been made available following initial discussions:
A VMware Aria Operations report containing current resource usage
The output from a planning session including a roadmap for planned service growth A service dependency map from the company's IT operations management tool The desired consolidation ratio for the target platform is 10:1 The applications hosting budget is reducing by 10% Which two contain the technical requirements of the application? (Choose two.)
정답: A,C
An architect is holding a design workshop with a customer for a new solution. The customer states that the new solution needs to provide the following capabilities:
Automated deployment and lifecycle management of the vSphere platform
Self-Service deployment of virtual machines and other objects from a central catalog Monitoring, logging and analytic tooling to provide visibility and troubleshooting of the whole solution Support deployment via infrastructure-as-code methods for the additional management components The customer also requests that the solution be as cost-effective as possible while still delivering a fast time to value for the organization.
Which design approach should the architect recommend to meet these requirements?
Automated deployment and lifecycle management of the vSphere platform
Self-Service deployment of virtual machines and other objects from a central catalog Monitoring, logging and analytic tooling to provide visibility and troubleshooting of the whole solution Support deployment via infrastructure-as-code methods for the additional management components The customer also requests that the solution be as cost-effective as possible while still delivering a fast time to value for the organization.
Which design approach should the architect recommend to meet these requirements?
정답: C
설명: (Fast2test 회원만 볼 수 있음)
A company has the requirement to ensure that business-critical applications have the necessary network bandwidth to function optimally and maintain a consistent quality of service (QoS).
Which statement would be included in the conceptual design to support this requirement?
Which statement would be included in the conceptual design to support this requirement?
정답: C
An architect is responsible for the following customer considerations in a hardware refresh:
Capacity planning will ensure that the environment does not exceed 70% of peak-average utilization on deployment.
CPU purchases will favor clock speed and last level cache over cores per socket.
Additional ESXi hosts will be added to the cluster when CPU or memory utilization exceeds 70% for 3 consecutive business days.
Path Selection policy will be set to round robin and set to switch paths with every SCSI command.
vCPU to pCPU ratio may not exceed 5:1.
What are three considerations when designing for performance? (Choose three.)
Capacity planning will ensure that the environment does not exceed 70% of peak-average utilization on deployment.
CPU purchases will favor clock speed and last level cache over cores per socket.
Additional ESXi hosts will be added to the cluster when CPU or memory utilization exceeds 70% for 3 consecutive business days.
Path Selection policy will be set to round robin and set to switch paths with every SCSI command.
vCPU to pCPU ratio may not exceed 5:1.
What are three considerations when designing for performance? (Choose three.)
정답: C,D,E
An architect is documenting the logical design for a new vSphere solution. The following requirements have been provided to the architect by the customer for the design:
The solution must be deployed in two locations: DC1 and DC2
The solution must limit the impact radius of accidental changes by administrators The solution must meet a recovery time objective (RTO) of four (4) hours and recovery point objective (RPO) of 24 hours The solution must allow workloads to run in both DC1 and DC2 during normal operations The solution must allow workloads to be moved bi-directionally between DC1 and DC2 The solution must use hyper-converged infrastructure for the virtual machine storage The customer has also confirmed that the network connection between DC1 and DC2 has a 10 Gbps bandwidth with a maximum round trip latency of 4 ms.
The architect recommends the following design decision:
Use separate clusters in DC1 and DC2 to form a multi-region design
What should the architect include as justification for this design decision?
The solution must be deployed in two locations: DC1 and DC2
The solution must limit the impact radius of accidental changes by administrators The solution must meet a recovery time objective (RTO) of four (4) hours and recovery point objective (RPO) of 24 hours The solution must allow workloads to run in both DC1 and DC2 during normal operations The solution must allow workloads to be moved bi-directionally between DC1 and DC2 The solution must use hyper-converged infrastructure for the virtual machine storage The customer has also confirmed that the network connection between DC1 and DC2 has a 10 Gbps bandwidth with a maximum round trip latency of 4 ms.
The architect recommends the following design decision:
Use separate clusters in DC1 and DC2 to form a multi-region design
What should the architect include as justification for this design decision?
정답: C
설명: (Fast2test 회원만 볼 수 있음)
An architect is tasked with devising a vSphere design strategy that will allow the company to quickly scale global data center functionality when a new location is identified.
The following requirements must be met:
The solution must include VMware licensing costs.
The design must keep data locally to each specific location.
The design must utilize current company processes around vSphere.
Any new global location must be functional within one month of identification.
Which design strategy will meet these requirements?
The following requirements must be met:
The solution must include VMware licensing costs.
The design must keep data locally to each specific location.
The design must utilize current company processes around vSphere.
Any new global location must be functional within one month of identification.
Which design strategy will meet these requirements?
정답: D
설명: (Fast2test 회원만 볼 수 있음)
A company has a requirement that all production applications must have a maximum tolerable downtime (MTD) of one hour per month.
Which statement would be included in the physical design to support this requirement?
Which statement would be included in the physical design to support this requirement?
정답: B
설명: (Fast2test 회원만 볼 수 있음)
An architect is responsible for designing the upgrade of a brownfield vSphere-based solution for a financial services customer. The customer has a requirement to host a mission critical, latency sensitive stock trading application.
During initial meetings with the customer, the following information is provided:
The solution is currently running vSphere 7.0 U3
All vSphere distributed switches (VDS) are at version 7.0.0
The customer has provisioned new hardware with dedicated AMD Data Processing Units (DPU) The mission critical applications must not be adversely affected by other workloads running in the environment The architect has made the following design decisions:
The solution will upgrade the existing VMware vCenter Server to version 8.0 The solution will upgrade all existing VMware ESXi hosts to version 8.0 The solution will deploy VMware ESXi 8.0 for all new host servers Which three additional design decisions should the architect make to ensure that the new hardware can be used to support the latency-sensitive application? (Choose three.)
During initial meetings with the customer, the following information is provided:
The solution is currently running vSphere 7.0 U3
All vSphere distributed switches (VDS) are at version 7.0.0
The customer has provisioned new hardware with dedicated AMD Data Processing Units (DPU) The mission critical applications must not be adversely affected by other workloads running in the environment The architect has made the following design decisions:
The solution will upgrade the existing VMware vCenter Server to version 8.0 The solution will upgrade all existing VMware ESXi hosts to version 8.0 The solution will deploy VMware ESXi 8.0 for all new host servers Which three additional design decisions should the architect make to ensure that the new hardware can be used to support the latency-sensitive application? (Choose three.)
정답: B,E,F
설명: (Fast2test 회원만 볼 수 있음)