Nokia OSPF Routing Protocol - 4A0-113무료 덤프문제 풀어보기

A. traceroute 10.2.3.1 next-hop 10.1.2.1

B. traceroute 10.2.3.1

C. traceroute 10.1.2.1

D. traceroute does not work on the Nokia 7750 SR.

E. traceroute next-hop 10.1.2.1

A. Show router ospf neighbors

B. Show router ospf adjacency

C. Show ospf adjacency

D. Show ospf neighbors

A. traceroute 2.3.4.0/24 next-hop 1.2.3.4

B. traceroute does not work on the Nokia 7750 SR

C. traceroute 2.3.4.1

D. traceroute next-hop 1.2.3.4

A. When an area needs to connect directly to another area without using area 0.

B. When two areas need to communicate and there is no area 0.

C. When an area needs to traverse another area to reach area 0.

D. When two areas are connected to area 0, but there is no direct path between them.

A. From the first 32 bits of the chassis MAC address

B. From the highest interface IP address

C. The loopback IP address

D. From the system IP address

E. By using the command "config router ospf router-id X.X.X.X"

F. From the last 32 bits of the chassis MAC address

A. Manual route summarization is done on the ABRs. By default, no route summarization is done and all routes are advertised to all areas.

B. Manual route summarization is done on the ABRs. By default, automatic summarization is done; however, it may not be optimal for all networks.

C. Manual route summarization must be done on all the backbone routers to be effective. Manual route summarization is optional on the routers in non-backbone areas.

D. Manual route summarization can only be done on autonomous system border routers.

A. The router must receive a Link State Packet

B. The router must receive a Hello

C. The router must receive an acknowledgment

D. The router must receive a new sequence number