Cisco Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) (642-832日本語版) - 642-832日本語무료 덤프문제 풀어보기
정답: B
정답: E
정답: F
정답: A,D,E
설명: (Fast2test 회원만 볼 수 있음)
정답: C
정답: F
정답:
Solution Steps need to follow as below:
When we check on client 1 & Client 2 desktop we are not receiving DHCP address from R4 ipconfig ----Client will be receiving IP address 10.2.1.3
From Client PC we can ping 10.2.1.254....
But IP 10.2.1.3 is able to ping from R4, R3, R2, R1.
Since the problem is R1 (2026::111:1) is not able to ping loopback of DSW1 (2026::102:1).
Kindly check for neighbourship of routers as IPV6.... As per design below neighbourship should be present for IPV6 R1 ---R2 --- R3 --- R4--- DSW1 & DSW2 ----- Neighbourship between devices of IPV6
R2 IPV6 OSPF neighbourship is with R1
R3 IPV6 OSPF neighbourship is with R4
As per above snapshot we cannot see IPV6 neighbourship between R2 & R3 when checked interface configuration ipv6 ospf area 0 is missing on R2 which is connected to R3
Change required: On R2, IPV6 OSPF routing, Configuration is required ipv6 ospf 6 area 0 under interface serial 0/0/0.23
So in ticket Answer to the fault condition will be as below for
When we check on client 1 & Client 2 desktop we are not receiving DHCP address from R4 ipconfig ----Client will be receiving IP address 10.2.1.3
From Client PC we can ping 10.2.1.254....
But IP 10.2.1.3 is able to ping from R4, R3, R2, R1.
Since the problem is R1 (2026::111:1) is not able to ping loopback of DSW1 (2026::102:1).
Kindly check for neighbourship of routers as IPV6.... As per design below neighbourship should be present for IPV6 R1 ---R2 --- R3 --- R4--- DSW1 & DSW2 ----- Neighbourship between devices of IPV6
R2 IPV6 OSPF neighbourship is with R1
R3 IPV6 OSPF neighbourship is with R4
As per above snapshot we cannot see IPV6 neighbourship between R2 & R3 when checked interface configuration ipv6 ospf area 0 is missing on R2 which is connected to R3
Change required: On R2, IPV6 OSPF routing, Configuration is required ipv6 ospf 6 area 0 under interface serial 0/0/0.23
So in ticket Answer to the fault condition will be as below for