Microsoft Installing and Configuring Windows 10 - 70-698무료 덤프문제 풀어보기
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains a single Active Directory domain named adatum.com.
The network contains five servers configured as shown in the following table:
All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA.
The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table:
All of the client computers run the 64-bit version of Windows. User3 frequently accesses ShareA. Remote Desktop is enabled on Computer4.
Your company identifies the following requirements.
*Ensure that you can test unsigned device drivers on Computer1
*Enable Credential Guard on Computer2.
*Run commands and cmdlets remotely on computer2.
*Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when elevated privileges are required.
*Ensure that User1 can view and interact with a desktop session of User3.
*Ensure that User2 can use Telnet to manage the mainframe.
*Ensure that User4 can use Remote Desktop to access Computer4 remotely.
End of repeated scenario.
You need to configure Computer3 to meet the UAC requirement.
What should you use?
Your network contains a single Active Directory domain named adatum.com.
The network contains five servers configured as shown in the following table:
All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA.
The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table:
All of the client computers run the 64-bit version of Windows. User3 frequently accesses ShareA. Remote Desktop is enabled on Computer4.
Your company identifies the following requirements.
*Ensure that you can test unsigned device drivers on Computer1
*Enable Credential Guard on Computer2.
*Run commands and cmdlets remotely on computer2.
*Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when elevated privileges are required.
*Ensure that User1 can view and interact with a desktop session of User3.
*Ensure that User2 can use Telnet to manage the mainframe.
*Ensure that User4 can use Remote Desktop to access Computer4 remotely.
End of repeated scenario.
You need to configure Computer3 to meet the UAC requirement.
What should you use?
정답: B
설명: (Fast2test 회원만 볼 수 있음)
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains a single Active Directory domain named adatum.com. The network contains five servers configured as shown in the following table.
All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA.
The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table.
All of the client computers run the 64-bit version of Windows. User3 frequently accesses ShareA. Remote Desktop is enabled on Computer4.
Your company identifies the following requirements.
*Ensure that you can test unsigned device drivers on Computer1
*Enable Credential Guard on Computer2.
*Run commands and cmdlets remotely on computer2.
*Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when elevated privileges are required.
*Ensure that User1 can view and interact with a desktop session of User3.
*Ensure that User2 can use Telnet to manage the mainframe.
*Ensure that User4 can use Remote Desktop to access Computer4 remotely.
End of repeated scenario.
You need to recommend a solution to meet the requirements of User1.
What should you include in the recommendation?
Your network contains a single Active Directory domain named adatum.com. The network contains five servers configured as shown in the following table.
All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA.
The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table.
All of the client computers run the 64-bit version of Windows. User3 frequently accesses ShareA. Remote Desktop is enabled on Computer4.
Your company identifies the following requirements.
*Ensure that you can test unsigned device drivers on Computer1
*Enable Credential Guard on Computer2.
*Run commands and cmdlets remotely on computer2.
*Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when elevated privileges are required.
*Ensure that User1 can view and interact with a desktop session of User3.
*Ensure that User2 can use Telnet to manage the mainframe.
*Ensure that User4 can use Remote Desktop to access Computer4 remotely.
End of repeated scenario.
You need to recommend a solution to meet the requirements of User1.
What should you include in the recommendation?
정답: C
설명: (Fast2test 회원만 볼 수 있음)
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1. Computer1 has a virtual hard disk (VHD) named Disk1.vhcix.
Windows is installed on Disk1.vhdx.disk1.vhdx is visible in File Explorer as drive E.
You need to configure Computer1 to start from VHDX. Hardware virtualization must not be available when Computer1 starts from VHDX.
What should you run?
You have a computer named Computer1. Computer1 has a virtual hard disk (VHD) named Disk1.vhcix.
Windows is installed on Disk1.vhdx.disk1.vhdx is visible in File Explorer as drive E.
You need to configure Computer1 to start from VHDX. Hardware virtualization must not be available when Computer1 starts from VHDX.
What should you run?
정답: C
설명: (Fast2test 회원만 볼 수 있음)
You have a computer named Computer1.
You obtain a new driver for a device installed on Computer1. The driver package is stored in C:\Drivers and includes the following files:
*Driver.inf
*Driver.dil
*Drivet.sys
*Driver.cat
You need to install the driver on Computer1 by using File Explorer.
Which file should you use to initiate the installation?
You obtain a new driver for a device installed on Computer1. The driver package is stored in C:\Drivers and includes the following files:
*Driver.inf
*Driver.dil
*Drivet.sys
*Driver.cat
You need to install the driver on Computer1 by using File Explorer.
Which file should you use to initiate the installation?
정답: D
설명: (Fast2test 회원만 볼 수 있음)
You have a laptop named Computer1 that runs Windows 10.
Computer1 connects to a wireless network named WiFi1 and a wireless network named WiFi2. WiFi1 has poor signal and the connection drops frequently. WiFi2 is available only during certain times of the day.
WiFi2 has a stronger signal that is more reliable than WiFi1.
You need to configure Computer1 to use WiFi2 whenever possible. Wifi1 should be used when WiFi2 is unavailable.
Which three settings should you configure? Each correct answer presents part of the solution.
Computer1 connects to a wireless network named WiFi1 and a wireless network named WiFi2. WiFi1 has poor signal and the connection drops frequently. WiFi2 is available only during certain times of the day.
WiFi2 has a stronger signal that is more reliable than WiFi1.
You need to configure Computer1 to use WiFi2 whenever possible. Wifi1 should be used when WiFi2 is unavailable.
Which three settings should you configure? Each correct answer presents part of the solution.
정답: A,E,F
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
Your network contains a single Active Directory domain. The domain contains devices that run Windows 10 Enterprise.
You need to prevent computers from connecting to hosts on subnet 131.107.0.0/24.
What should you do?
Your network contains a single Active Directory domain. The domain contains devices that run Windows 10 Enterprise.
You need to prevent computers from connecting to hosts on subnet 131.107.0.0/24.
What should you do?
정답: F
설명: (Fast2test 회원만 볼 수 있음)
A company plans to use an application triggered virtual private network (VPN) connection. You need to ensure that a VPN connection can be used with the application trigger. Which VPN setting should you configure?
정답: B
You have four computers configured as shown in the following table:
You need to deploy Windows 10 Enterprise. The deployment must support Miracast, BitLocker Drive Encryption (BitLocker), and Windows Hello with facial recognition.
On which computer should you install Windows 10?
You need to deploy Windows 10 Enterprise. The deployment must support Miracast, BitLocker Drive Encryption (BitLocker), and Windows Hello with facial recognition.
On which computer should you install Windows 10?
정답: D
설명: (Fast2test 회원만 볼 수 있음)
You have a Windows Server Update Services (WSUS) server.
You need to configure a computer to receive updates from WSUS. The solution must ensure that the updates are installed only on Sunday at 20:00.
Which two settings should you configure? To answer, select the appropriate settings in the answer area.
You need to configure a computer to receive updates from WSUS. The solution must ensure that the updates are installed only on Sunday at 20:00.
Which two settings should you configure? To answer, select the appropriate settings in the answer area.
정답:
Explanation
Specify intranet Microsoft Update service location
company manages Windows 8.1 Pro and Windows 10 Pro client devices by using Group Policy objects (GPOs). The company plans to migrate from GPOs to mobile device management (MDM) policies.
You need to create an HTML report of the GPO settings that are cross-referenced with supported MDM policies.
Solution: You use the MDM Migration Analysis Tool.
Does the solution meet the goal?
You need to create an HTML report of the GPO settings that are cross-referenced with supported MDM policies.
Solution: You use the MDM Migration Analysis Tool.
Does the solution meet the goal?
정답: A
설명: (Fast2test 회원만 볼 수 있음)