[2026] IBM Virtualization Technical Support for IBM i -v1

문제1

What boot mode is required when installing a hosted AIX or Linux partition?

A. Diagnostic with default boot list (DIAG_DEFAULT)

B. System Management Services (SMS)

C. Open Firmware OK prompt (OPEN_FIRMWARE)

D. Diagnostic with stored boot list (DIAG_STORED)

정답: B

문제2

A customer has a 4-partition Power 720 running firmware level 01_AL730_069. They want to load and activate the latest firmware, 01_AL730_085_060, onto their managed system during normal operations.
What is the correct way to do this?

A. From the HMC, select Update from the left panel Select the managed system Then Change License Code for current release

B. On the Service partition, load and apply immediate the corresponding MH PTF for 01_AL730_085.

C. On the Service partition, load the corresponding MH PTF for 01_AL730.
Start Service tools
Go to Advance Functions
Select Concurrent Firmware Update by entering "1"to run.

D. From the HMC, select Update from the left panel Select the managed system Then select Concurrent Firmware update

정답: A

문제3

A customer with an IBM i environment containing an iASP runs a Save 21 monthly. Normally the save takes about 5 hours. This month, the save took less than an hour. No errors were encountered on the save, and the amount of data in *SYSBAS and the ASP hasn't changed significantly. What is the most likely explanation for the difference in time required to process the save?

A. The user performing the save didn't have *ALLOBJ authority.

B. The iASP was notvaried on before the Save 21 was processed.

C. The ASPGRP was not correctly set in the backup job description.

D. Entry to the iASP was locked by a system task.

정답: B

문제4

Auditors have reviewed access to the HMC and determined that many users have too much authority. What is the correct method to restrict users to only a specific set of tasks?

A. Create and assign a new resource role that allows access to only the required resources.

B. In Manage Users and Tasks, check each task that is needed for this user.

C. Change the users'task role to hmcoperator.

D. Create and assign a new task role that allows only the required set of tasks.

정답: D

문제5

An administrator has an IBM i partition hosted by VIO Server (VIOS), and managed by an HMC.
The administrator has hdisk2 through hdiskl7 assigned to a vSCSI adapter, and wants to map 2 more virtual disk units, but receives an error when trying to map the disks to the vSCSI controller.
What is the cause of the error?

A. The PowerVM license must be upgraded to Enterprise from Standard.

B. The disk units are incorrectly formatted for AIX/VIOS.

C. The vSCSI adapter limit has been reached.

D. The client partition must be powered off to map virtual disks to a vSCSl controller.

정답: C

문제6

After using the Advanced Management Module (AMM) to move the BladeCenter's optical drive to a different POWER blade in the same chassis, the VIO Server on the blade from which the drive was removed still shows it as "available," while the blade to which it was moved doesn't reflect ownership of the device. Why is this occurring?

A. The VIO Servers on each POWER blade need to have actions taken in order to refresh the known inventory of physical hardware.

B. The VIO Server which is acquiring the hardware doesn't have an adapter available to support optical virtualization.

C. The IBM i partition which needs the optical device to be varied on with RESTART *YES in order to be acquired.

D. The scheduled inventory refresh has not yet processed.

정답: A

IBM Virtualization Technical Support for IBM i -v1 - C4040-121무료 덤프문제 풀어보기

우리와 연락하기

유용한 링크

최신 업데이트