EMC Dell Technologies PowerMax Operate - D-PVM-OE-01무료 덤프문제 풀어보기
Where are the Host l/Os directed to when the Storage Group is in a Non-Disruptive Migration CutoverReady state?
정답: B
A PowerMax 8000 was initially ordered as a multi-engine system. How does this system differ from a PowerMax 8000 that was initially ordered as a single-engine even if it is upgraded to a multi-engine system at a later time?
정답: B
A PowerMax array has been added to the environment. As part of the configuration, a weekly backup is done every Sunday during the 8:00 AM hour. The load for all components during the backup window should not be in system-level compliance calculations.
Using the simulator, set a recurring exclusion window at the system level on the array for the backup window.
Using the simulator, set a recurring exclusion window at the system level on the array for the backup window.
정답:
See the explanation for step by step solution.
Explanation:
Okay, I understand. We need to configure a recurring exclusion window in the Unisphere for PowerMax simulator to exclude performance load during a weekly backup that occurs every Sunday from 8:00 AM to 9:
00 AM. This exclusion will prevent the backup load from affecting system-level compliance calculations.
Here's a step-by-step guide on how to do this, based on typical Unisphere functionality:
Steps:
1. Launch the Simulator and Navigate to the System Settings
* Open Unisphere for PowerMax in your web browser.
* Log in to the simulator (you should already be logged in with the array SID 1762 selected, based on the image).
* In the left-hand navigation pane, locate the settings or configuration section. The exact location might vary slightly, but it's often found under:
* Home>System Settings
* Settings(an icon representing settings, like a gear)
* Admin>System
* In this instance, click thegearicon on the top right corner of the Unisphere interface.
2. Find the Exclusion Window Settings
* Within the system settings, look for a section related to performance monitoring, metrics, or thresholds.
* Within this section, search for an option to configure "Exclusion Windows," "Scheduled Exclusions," or something similar. The exact name may vary.
3. Create a New Exclusion Window
* Click on a button or link to create a new exclusion window. This might be labeled:
* "Create"
* "Add"
* "+"(a plus icon)
* A new window or panel will appear, allowing you to configure the exclusion window settings.
4. Configure the Exclusion Window Settings
* Name (Optional):You can give the exclusion window a descriptive name, such as "Weekly Backup Exclusion."
* Type:Select"Recurring"or"Repeating"as the exclusion window type.
* Schedule:
* Day of the Week:Select"Sunday".
* Start Time:Set the start time to 08:00 (or 8:00 AM). Make sure the time is in 24-hour format or that you correctly select AM if using 12-hour format.
* End Time:Set the end time to 09:00 (or 9:00 AM).
* Scope/Target:Since we want this exclusion to apply at the system level, make sure the scope is set to
"System"or the entire array (SID 1762 in this case). You might not need to explicitly select this if system-level is the default.
* Components/Metrics:In some Unisphere versions, you can choose which components or metrics to exclude. In our case, we want to exclude the load for "all components." If there's an option to select components, either choose "All" or leave it at the default (which likely includes all components).
5. Save the Exclusion Window
* After configuring all the settings, review them carefully to make sure they are correct.
* Click the button to save the exclusion window. This might be labeled:
* "Create"
* "Save"
* "OK"
* "Apply"
6. Verify Exclusion Window Creation (Optional)
* After the exclusion window is created, you can usually verify its settings in the exclusion window list.
* You should see the new exclusion window listed with the correct schedule (Sunday, 8:00 AM - 9:00 AM) and scope (system level).
Topic2, Multiple Choice Questions
Explanation:
Okay, I understand. We need to configure a recurring exclusion window in the Unisphere for PowerMax simulator to exclude performance load during a weekly backup that occurs every Sunday from 8:00 AM to 9:
00 AM. This exclusion will prevent the backup load from affecting system-level compliance calculations.
Here's a step-by-step guide on how to do this, based on typical Unisphere functionality:
Steps:
1. Launch the Simulator and Navigate to the System Settings
* Open Unisphere for PowerMax in your web browser.
* Log in to the simulator (you should already be logged in with the array SID 1762 selected, based on the image).
* In the left-hand navigation pane, locate the settings or configuration section. The exact location might vary slightly, but it's often found under:
* Home>System Settings
* Settings(an icon representing settings, like a gear)
* Admin>System
* In this instance, click thegearicon on the top right corner of the Unisphere interface.
2. Find the Exclusion Window Settings
* Within the system settings, look for a section related to performance monitoring, metrics, or thresholds.
* Within this section, search for an option to configure "Exclusion Windows," "Scheduled Exclusions," or something similar. The exact name may vary.
3. Create a New Exclusion Window
* Click on a button or link to create a new exclusion window. This might be labeled:
* "Create"
* "Add"
* "+"(a plus icon)
* A new window or panel will appear, allowing you to configure the exclusion window settings.
4. Configure the Exclusion Window Settings
* Name (Optional):You can give the exclusion window a descriptive name, such as "Weekly Backup Exclusion."
* Type:Select"Recurring"or"Repeating"as the exclusion window type.
* Schedule:
* Day of the Week:Select"Sunday".
* Start Time:Set the start time to 08:00 (or 8:00 AM). Make sure the time is in 24-hour format or that you correctly select AM if using 12-hour format.
* End Time:Set the end time to 09:00 (or 9:00 AM).
* Scope/Target:Since we want this exclusion to apply at the system level, make sure the scope is set to
"System"or the entire array (SID 1762 in this case). You might not need to explicitly select this if system-level is the default.
* Components/Metrics:In some Unisphere versions, you can choose which components or metrics to exclude. In our case, we want to exclude the load for "all components." If there's an option to select components, either choose "All" or leave it at the default (which likely includes all components).
5. Save the Exclusion Window
* After configuring all the settings, review them carefully to make sure they are correct.
* Click the button to save the exclusion window. This might be labeled:
* "Create"
* "Save"
* "OK"
* "Apply"
6. Verify Exclusion Window Creation (Optional)
* After the exclusion window is created, you can usually verify its settings in the exclusion window list.
* You should see the new exclusion window listed with the correct schedule (Sunday, 8:00 AM - 9:00 AM) and scope (system level).
Topic2, Multiple Choice Questions
Which service has to be manually started first when Unisphere services are down?
정답: D
Exhibit.
Which activity needs to be performed prior to the operations shown in the exhibit?
Which activity needs to be performed prior to the operations shown in the exhibit?
정답: C
A systems administrator uses the symrdf createpair command to create an R1/R2 pair. Both devices are dynamic SRDF devices.
What is the default mode of operation for the SRDF pair when the Establish operation is performed?
What is the default mode of operation for the SRDF pair when the Establish operation is performed?
정답: D
A systems administrator has decommissioned a host with two devices allocated to it. What must the administrator do prior to deleting the devices?
정답: C
Exhibit.
Which activity needs to be performed prior to the operations shown in the exhibit?
Which activity needs to be performed prior to the operations shown in the exhibit?
정답: D
Which services are active after a Unisphere for PowerMax installation on a Microsoft Windows host?
정답: D
설명: (Fast2test 회원만 볼 수 있음)
A PowerMax systems administrator has created three storage groups with the diamond, gold, and silver service levels. How does the system ensure the service level response times are met during heavy workloads?
정답: C
A systems administrator wants to know how to convert SRDF ports back to FA ports on their PowerMax array What information should be provided'?
정답: A
A Fibre Channel Host Bus Adapter (HBA) has failed on a host. You have been tasked with replacing the failed adapter.
What is the correct sequence of steps to successfully replace the adapter?
What is the correct sequence of steps to successfully replace the adapter?
정답:
Explanation:
1.view old HBA WWN
2.swap out the old HBA
3.Discover the WWN
4.Use the replace action
5.Use the rename action
An administrator is using Unisphere tor PowerMax Workload Planner to assess the performance and compliance of a PowerMax Storage Group (SG) How does the Planner calculate if the Storage Group workload is stable?
정답: D
설명: (Fast2test 회원만 볼 수 있음)
Production work has been started on the R2 devices after an 5RDF Failover operation. Where will the changes made to the R2 devices be reflected in the SRDF Query output shown in the exhibit?
정답: C