Huawei HCIP-Security V4.0 - H12-725_V4.0무료 덤프문제 풀어보기
In the figure, FW_A connects to FW_B through two links working in active/standby mode. When the active link of FW_A is faulty, the old IPsec tunnel 1 needs to be torn down, and IPsec tunnel 2 needs to be established with FW_B through the standby link to route traffic. In this case, configuring the IKE _____ detection mechanism on FW_A helps detect link faults and tear down the IPsec tunnel.(Enter lowercase letters.)
정답:
dpd
Explanation:
* What is IKE DPD (Dead Peer Detection)?
* IKE DPD (Dead Peer Detection)is a mechanism used inIPsec VPNsto check if a remote VPN peer is still reachable.
* It allows the firewall to detectlink failuresandautomatically tear down and re-establish IPsec tunnelswhen necessary.
* Why is DPD required in this scenario?
* The network uses an active/standby link setup:
* IPsec Tunnel 1 (Active) # Uses Link 1 (GE0/0/1).
* IPsec Tunnel 2 (Standby) # Uses Link 2 (GE0/0/2).
* IfLink 1 fails, the firewall must detect the failure andtear down IPsec Tunnel 1before establishingIPsec Tunnel 2 over Link 2.
* DPD detects unreachable peersand triggers a failover.
* How does IKE DPD work?
* DPD periodically sends probes (HELLO messages) to the remote VPN peer.
* If no response is received within a timeout period, the firewall assumes the peer is down.
* Thefirewall deletes the IPsec tunnel and switches to the backup link.
* Why is the answer "dpd" (lowercase)?
* The questionexplicitly asks for lowercase letters.
* "dpd" (Dead Peer Detection) is the correct technical term in Huawei firewalls and networking standards.
HCIP-Security References:
* Huawei HCIP-Security Guide# IPsec VPN High Availability & DPD
* Huawei USG Series Firewall Configuration Guide# IKE Dead Peer Detection (DPD)
Explanation:
* What is IKE DPD (Dead Peer Detection)?
* IKE DPD (Dead Peer Detection)is a mechanism used inIPsec VPNsto check if a remote VPN peer is still reachable.
* It allows the firewall to detectlink failuresandautomatically tear down and re-establish IPsec tunnelswhen necessary.
* Why is DPD required in this scenario?
* The network uses an active/standby link setup:
* IPsec Tunnel 1 (Active) # Uses Link 1 (GE0/0/1).
* IPsec Tunnel 2 (Standby) # Uses Link 2 (GE0/0/2).
* IfLink 1 fails, the firewall must detect the failure andtear down IPsec Tunnel 1before establishingIPsec Tunnel 2 over Link 2.
* DPD detects unreachable peersand triggers a failover.
* How does IKE DPD work?
* DPD periodically sends probes (HELLO messages) to the remote VPN peer.
* If no response is received within a timeout period, the firewall assumes the peer is down.
* Thefirewall deletes the IPsec tunnel and switches to the backup link.
* Why is the answer "dpd" (lowercase)?
* The questionexplicitly asks for lowercase letters.
* "dpd" (Dead Peer Detection) is the correct technical term in Huawei firewalls and networking standards.
HCIP-Security References:
* Huawei HCIP-Security Guide# IPsec VPN High Availability & DPD
* Huawei USG Series Firewall Configuration Guide# IKE Dead Peer Detection (DPD)
The difference between DoS attacks and DDoS attacks is that DoS attacks are usually directly initiated by attackers, whereas DDoS attacks are usually initiated by attackers controlling multiple zombies.
정답: B
설명: (Fast2test 회원만 볼 수 있음)
The Common Vulnerability Scoring System (CVSS) is a widely used open standard for vulnerability scoring. It uses a modular scoring system. Which of the following is not included in the CVSS?
정답: B
설명: (Fast2test 회원만 볼 수 있음)
iMaster NCE-Campus has a built-in LDAP module that enables it to function as an LDAP server to interconnect with access devices through LDAP.
정답: A
설명: (Fast2test 회원만 볼 수 있음)
Which of the following statements are true about SYN scanning attacks?(Select All that Apply)
정답: A,B,C
설명: (Fast2test 회원만 볼 수 있음)
When Eth-Trunk is deployed for the heartbeat links between firewalls, the Eth-Trunk interface can be configured as a Layer 2 interface as long as the total bandwidth of active links on the Eth-Trunk is greater than 30% of the bandwidth required by service traffic.
정답: A
설명: (Fast2test 회원만 볼 수 있음)
In the figure, if 802.1X authentication is used for wired users on the network, the network admission device and terminals must be connected through a Layer 2 network.
Options:
Options:
정답: B
설명: (Fast2test 회원만 볼 수 있음)