[2026] HPE Compute Solutions - HPE0-S59 무료 시험 문제

문제1

Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?

A. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

B. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN

C. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.

D. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses

정답: D

설명: (Fast2test 회원만 볼 수 있음)

문제2

Admins want to update the Mellanox kernel drivers running on the Al optimized workers in an HPE Private Cloud Al solution. What does HPE recommend?

A. Using the OFED drivers downloaded from the HPE support site

B. Updating the drivers as part of the HPE Private Cloud Al software catalog update

C. Updating the HPE Aruba Networking CX switches ' software first

D. Running the update from the HPE Al Essentials Ul

정답: C

문제3

Your customer wants to update the firmware for 36 HPE Synergy 480 Gen 10 compute modules with a server profile assigned from a server profile template.
Put the steps required to achieve this goal on the left into their correct order on the right.

정답:

Explanation:
To update the firmware for the HPE Synergy 480 Gen 10 compute modules with a server profile assigned from a server profile template, the steps should be performed in the following order:
* Upload SPP to HPE OneView repository. (First, the Service Pack for ProLiant (SPP) containing the firmware updates must be uploaded to the HPE OneView repository.)
* Select Firmware baseline within server profile template. (Next, you need to select the desired firmware baseline in the server profile template.)
* Select installation method (online or offline). (Choose whether the firmware updates will be installed online or offline.)
* Update all server profiles from the template. (Finally, update all server profiles from the modified template to apply the firmware updates to the compute modules.)

문제4

Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?

A. Enter both modules into a maintenance mode, then enable FC connectivity through CLI

B. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules

C. Enable FC primary and secondary boot on the modules through the HPE OneView interface

D. FC connectivity on the modules should be enabled through the service console by disabling FCoE.

정답: B

문제5

Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?

A. HPE OneView offers additional functionalities for HPE Primera like CPG management

B. HPE OneView offers limited support tor HPE Primera because of the firmware differences

C. To manage HPE Primera using HPE OneView. a dedicated license is required

D. Management procedures and features are the same tor both types of the array

정답: D

문제6

Which statement about HPE Superdome Flex firmware updates is true?

A. RMC CLI is the only tool that can be used to update HPE Persistent Memory firmware.

B. HPE OneView is the only tool that can be used to perform I/O updates.

C. HPE SUM is the only tool that can be used to update HPE Persistent Memory firmware.

D. RMC CLI can simultaneously update complex firmware for multiple HPE Superdome systems.

정답: D

설명: (Fast2test 회원만 볼 수 있음)

문제7

Refer to Exhibit:

Your customer plans to update the firmware for the logical interconnect shown.
Based on the information in the exhibit, which statement about network connectivity is true?

A. Compute nodes will experience network downtime if the Force option is selected, as it will enforce parallel update.

B. Compute nodes will experience network downtime not longer than 1 minute regardless of the orchestration method.

C. Only the manual orchestration method will allow a firmware upgrade without causing network downtime.

D. It is possible to update this logical interconnect without network downtime if orchestrated method is used.

정답: D

문제8

Which statement about HPE Apollo 2000 Gen10 Plus platform is true?

A. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs

B. It can support a single processor only and up to 4 per chassis

C. It is equipped with HPE Persistent memory by default

D. It is fully managed using HPE OneView including all connections

정답: A

문제9

As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2 Why would you recommend this change?

A. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog

B. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort

C. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.

D. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely

정답: C

설명: (Fast2test 회원만 볼 수 있음)

문제10

Your customer changed the storage pool state from managed to discovered.
What is the impact of that change?

A. Volume provisioning will be disabled for that storage pool.

B. Storage pool parameters cannot be modified using HPE OneView.

C. All volumes from that pool will be removed from HPE OneView.

D. This storage pool can be deleted using HPE OneView interface.

정답: A

문제11

Which statement about an HPE Oneview support dump is true?

A. Support dump can be created if HPE Virtual Connect modules are installed in the frame

B. Support dump is a binary file that can be opened only in a dedicated application

C. Appliance support dump by default contains a logical enclosure support dump

D. Preview support dump is available only when creating an appliance support dump

정답: C

설명: (Fast2test 회원만 볼 수 있음)

문제12

Which statement about login redistribution is true?

A. Login redistribution is used for login balancing when they are not distributed evenly over the FC links

B. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame

C. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports

D. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules

정답: A

설명: (Fast2test 회원만 볼 수 있음)

문제13

What is a requirement for setting the CNSA security state on an HPE ProLiant server?

A. The server uses iLO 7.

B. The server has a certificate signed by a well-known CA installed on it.

C. The server has an iLO Advanced license.

D. The server is managed by HPE Compute Ops Management.

정답: C

설명: (Fast2test 회원만 볼 수 있음)

HPE Compute Solutions - HPE0-S59무료 덤프문제 풀어보기

우리와 연락하기

유용한 링크

최신 업데이트