시험전 20-30시간의 공부시간

자격증을 취득하려면 오랜시간동안 시험공부를 해야 한다고 생각하시는 분들이 많습니다. 하지만 이는 70-595덤프가 아닌 다른 공부방법에 적용되는 보편적인 생각일뿐입니다. 70-595덤프를 공부하시는데는 20~30시간만 사용하시면 됩니다.덤프만 있으면 다른 공부자료는 필요하지 않습니다.덤프는 TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010시험문제의 모든 범위와 유형을 포함하고 있어 70-595덤프에 있는 문제와 답만 기억하시면 시험문제가 변경되지 않는다면 합격을 예약한것과 같다고 보시면 됩니다.

퍼펙트한 시험대비자료

70-595 최신덤프는 70-595실제시험의 모든 범위를 커버하고 있고 모든 시험유형이 포함되어 있어 시험대비 공부의 완벽한 선택입니다.최신버전 덤프는 TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010시험문제에 근거하여 만들어진 시험준비 공부가이드로서 학원공부 필요없이 덤프공부 만으로도 시험을 한방에 패스할수 있습니다.자격증을 취득하시면 국제적으로 인정받기에 취직이나 승진 혹은 이직에 힘을 가해드립니다.

우선 시험센터에서 정확한 시험코드를 확인하고 그 코드와 동일한 코드로 되어있는 덤프를 구매하셔서 덤프에 있는 문제와 답을 기억하시면 시험을 쉽게 패스하실수 있습니다. 70-595덤프는 가장 최근 기출문제를 기준으로 제작되기에 TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010시험문제가 변경되지 않는한 100%에 가까운 적중율을 보장해 시험에서 패스하는데 가장 좋은 동반자로 되어드릴것입니다.

DOWNLOAD DEMO

구매전 덤프 샘플문제 다운

70-595덤프를 구매하기전에 사이트에서 해당 덤프의 무료샘플을 다운받아 덤프품질을 체크해보실수 있습니다. TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010덤프를 구매하시면 구매일로부터 1년내에 덤프가 업데이트된다면 업데이트된 버전을 무료로 제공해드립니다.만약 70-595덤프를 구매하고 공부한후 70-595시험에서 떨어지면 60일내 주문은 덤프비용 전액을 환불해드려 고객님의 이익을 최대한 보장해드립니다.

최신 TS 70-595 무료샘플문제:

1. You are developing a BizTalk Server 2010 solution that has two orchestrations, A and B, that exist in different projects. A message sent between the orchestrations has a promoted property named OrderID that can be used as a unique identifier for the message. The two projects must remain independent from each other. Updates are made to Orchestration B to ensure that the output message promotes the OrderID property when it publishes the message. You need to enable Orchestration A to send a message to Orchestration B and receive a message back when Orchestration B finishes. You create a correlation type on the OrderID property and a new correlation set in Orchestration A. What should you do next?

A) Set the Send shape in Orchestration A to initialize the correlation set. Set the Receive shape in Orchestration A to follow the correlation set.
B) Reference the Orchestration A project from the Orchestration B project. Create a new correlation set in Orchestration B by using the correlation type. Set the Receive shape on Orchestration A to initialize the correlation set. Set the Send shape on Orchestration B to follow the correlation set.
C) Set the Receive shape in Orchestration A to initialize the correlation set. Set the Send shape in Orchestration A to follow the correlation set.
D) Reference the Orchestration A project from the Orchestration B project. Create a new correlation set in Orchestration B by using the correlation type. Set the Send shape on Orchestration A to initialize the correlation set. Set the Receive shape on Orchestration B to follow the correlation set.

2. A BizTalk Server 2010 solution processes envelope messages. A receive port uses the XML disassembler pipeline component to split the envelope messages into an interchange of separate child messages. The messages are not validated. The entire interchange fails when the receive pipeline processes the message. You need to ensure that processing continues for the remaining child messages.
What should you do on the XML disassembler pipeline component?

A) Set the Document Schema property to Microsoft.XLANGs.BaseTypes.Any.
B) Set the Recoverable Interchange Processing property to True.
C) Set the Allow Unrecognized Message property to True.
D) Set the Validate document structure property to False.

3. A BizTalk Server 2010 solution contains a map that transforms an internal order format into the order format of a supplier. You have examples of the internal order. You need to perform unit testing to make sure that the map works. You add a test project and a test class to the solution. You then add a reference to the project with the map. What should you do next?

A) Add a reference to Microsoft.XLANGs.BaseTypes and to Microsoft.BizTalk.BaseFunctoids. Use the TestableSchemaBase class to test the schema.
B) Add a reference to Microsoft.BizTalk.TestTools and to Microsoft.XLANGs.BaseTypes. Use the TestableMapBase class to test the map.
C) Add a reference to Microsoft.XLANGs.BaseTypes and to Microsoft.BizTalk.BaseFunctoids. Use the TestableMapBase class to test the map.
D) Add a reference to Microsoft.BizTalk.TestTools and to Microsoft.BizTalk.BaseFunctoids. Use the TestableMapBase class to test the map.

4. A BizTalk Server 2010 solution transmits messages to a suppliers FTP server. The solution uses an FTP send port. The transport URI points to the main FTP server location. The supplier needs to receive the message immediately if the connection with the main FTP server cannot be established. You need to enable transmission redirection to an alternative FTP server. What should you do?

A) Enable failed message routing for the send port.
B) Set the Retry count to 1. Set the Backup Transport Type to FTP and the Backup Transport URI to the alternative FTP server location.
C) Enable ordered delivery for the send port.
D) Set the Retry count to 0. Set the Backup Transport Type to FTP and the Backup Transport URI to the alternative FTP server location.

5. An existing BizTalk Server 2010 messaging solution for processing orders has a send port group that contains two send ports.
Send Port A is for Supplier A and Send Port B is for Supplier B.
Each supplier receives only one copy of each order message.
The order schema has a promoted property named OrderAmount that contains the total amount of the order.
The send port group subscribes to all messages where a promoted property OrderAmount exists.
The send ports do not have a filter defined. Messages with an order amount less than or equal to 1000 must be sent to Supplier A.
Messages with an order amount greater than 1000 must be sent to Supplier B.
Only a single message can be sent to either Supplier A or Supplier B.
You need to modify the solution to route each order message to either Supplier A or Supplier B.
What should you do?

A) Set a filter on Send Port A to subscribe for messages where OrderAmount is <= 1000. Set a filter on Send Port B to subscribe for messages where OrderAmount is > 1000. Delete the send port group.
B) Delete the existing filter condition on the send port group. Add a filter condition on the send port group to subscribe for messages where OrderAmount is <= 1000. Add a filter OR condition on the send port group to subscribe for messages where OrderAmount is > 1000.
C) Keep the existing filter condition on the send port group. Add a filter condition on the send port group to subscribe for messages where OrderAmount is <= 1000. Add a filter OR condition on the send port group to subscribe for messages where OrderAmount is > than 1000.
D) Set a filter on Send Port A to subscribe for messages where OrderAmount is <= 1000. Set a filter on Send Port B to subscribe for messages where OrderAmount is > 1000. Stop and start the send port group.

질문과 대답: