자격증의 가치는 발급 기관의 공신력에서 나옵니다. NACE Coating Inspector Level 1처럼 업계에서 널리 인정받는 자격을 목표로 하신다면, 2026년 기준으로 전문가들이 검증한 Fast2test의 NACE-CIP1-001 학습 자료로 준비하시기 바랍니다.

NACE NACE-CIP1-001 시험 개요:

NACE NACE-CIP1-001 시험 요강 주제:

NACE-CIP1-001 수험생을 위한 핵심 질문과 답변

최신 CIP Level 1 NACE-CIP1-001 무료샘플문제

문제 #1

Due to a previous premature coating failure the owner has required the original coating applicator to return to remove and replace 10,000 square feet of a failed three coat system at the applicator's cost. Due to the financial implications of another failure, the owner has offered you the job as the NACE CIP Level 1 Coating Inspector and explained that he expects you to be his "insurance policy" for this job. You have never been involved in a warranty job before and are unfamiliar with the coating system.
Your preferred FIRST course of action is to:

A. Review the Product Data Sheets and meet with the Coating Applicator 'prior to the pre-job meeting
B. Purchase Professional Liability Insurance prior to job commencement
C. Review the Product Data Sheets, and conduct a walk thru of the job site prior to the pre-job Conference
D. Meet with the owner and explain your limitations and concerns prior accepting the assignment

문제 #2

Common errors that may produce inaccurate readings when using a Dial-Type Magnetic Pull-Off Dry Filth Thickness (DFT) gauge include:
Select All That Apply

A. Failing to determine the base metal reading (BMR)
B. Taking measurements too far from the edge of a surface
C. Rotating the dial too fast when taking measurements
D. Measuring ditty, tacky, or soft films

문제 #3

If the project specification DOES NOT state the specific DFT measurement standards, the inspector should use

A. NACE 2/SSPC SP10
B. their best judgment based on similar projects and specifications.
C. a detailed checklist and document the lack of a standard.
D. a recognized industry standard like SSPC-PA 2 that is broadly accepted

문제 #4

When using the ISO comparator in accordance with ISO 8503, if the surface profile does not directly compare to one of the four segments the inspector should:

A. Record your result by identifying two segments
B. Record the segment with the more aggressive profile
C. Record the segment with the less aggressive profile
D. Use another method as the comparator method is too subjective

문제 #5

Which is a component that supplies most of the features and functions of the material?

A. pigment
B. additive
C. binder
D. solvent

질문과 대답: