Nokia MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 - SRAN-Radio-Network-Performance-Optimization무료 덤프문제 풀어보기

A. To check whether there are enough resources for new connections

B. To increase the spectral efficiency

C. To manage the modulation schemes

D. To optimize the downlink throughput

A. Beamforming and MIMO are the same.

B. Beamforming and MIMO cannot be used together.

C. MIMO focuses on directing the signal, while beamforming focuses on utilizing multiple paths for data transmission.

D. Beamforming focuses on directing the signal, while MIMO focuses on utilizing multiple paths for data transmission.

A. If the RACH procedure fails for an NSA UE, it reports the failure to the eNB via the 4G RRC connection, and the eNB informs the gNB via the X2 connection.

B. If there is already an existing connection, the gNB can instruct the UE to use a specific, dedicated preamble. Therefore, there is no risk of preamble collision, and contention resolution is not needed.

C. If the RACH preamble is not particularly robustly coded, there is a risk that random noise combines into something that the BTS receiver interprets as a valid preamble.

D. If there is no existing connection between the UE and the RAN, the UE autonomously selects a preamble from the provided range and starts the access procedure.

A. A, B, and C

B. Packet Loss Rate, or PLR, for VoNR is minimized, improving voice call quality.

C. B and C

D. A only

E. Specific initial BLER targets are used for VoNR DRBs.

F. MCS downgrade control is used for VoNR DRBs.

G. Configurable uplink minimum TBS is used for VoNR DRBs.

H. A, B, C, and D