Nokia SR Linux EVPN and Data Center Interconnect - 4A0-D03무료 덤프문제 풀어보기

A. In an all-active multi-homing scenario, the DF-election is used to identify the leaf router that is responsible for forwarding BUM traffic to the host.

B. The Ethernet segment is associated with the next-hop for the 3rd party prefixes.

C. In a single-active multi-homing scenario, the DF-election is used to identify the active leaf router.

D. All learned 3rd party prefixes are advertised using EVPN route type 5.

A. MAC-VRF100 on Leaf1 and Leaf2 must have BGP EVPN and BGP VPN configured.

B. The IRB interfaces on Leaf1 and Leaf2 must be configured to advertise learned local host-routes.

C. IP-VRF1 on Leaf1, Leaf2 and Leaf3 must be configured with a VXLAN-routed interface.

D. Anycast gateway is an optional configuration on the Leaf1 and Leaf2 IRB interfaces.

A. AD per EVI routes

B. IP/MAC routes

C. AD per ES routes

D. Ethernet segment routes

A. The route reflectors in the different data centers must be able to reach each other.

B. All the data center leaf routers must be reachable over the WAN network.

C. The VXLAN tunnels are required between the leaf routers in the different data centers.

D. The data center gateway and the WAN PE functions are performed on a single router.

A. The multi-homing mode of all-active must be configured for the Ethernet segment.

B. The 2nd through 7th octets of the ESI must not be all zeros.

C. All of the sub-interfaces of the LAG must be configured in the Ethernet segment.

D. The Ethernet segment must be administratively enabled.

A. The ingress PE performs both MAC and IP forwarding.

B. EVPN route-type 5 must be supported by the PEs involved.

C. Each MAC-VRF used in the L3 EVPN network must exist on each PE.

D. The egress PE performs MAC forwarding only.