IBM Virtualization Technical Support for IBM i -v1은 출제 범위가 넓고 문제 유형이 다양해 체계적인 대비 없이는 다루기 쉽지 않은 시험입니다. Fast2test의 C4040-121 모의고사 102문항은 실제 시험의 구성과 유사하게 만들어져 있어, 처음 응시하시는 분도 시험 구조를 빠르게 파악하실 수 있습니다.

IBM C4040-121 시험 개요:

IBM C4040-121 시험 요강 주제:

IBM Virtualization Technical Support for IBM i -v1에 대해 수험생이 가장 많이 묻는 질문

최신 IBM Certifed Systems Expert C4040-121 무료샘플문제

문제 #1

How are consoles accessed remotely for AIX and Linux partitions running on an HMC-managed Power Systems server?

A. Use LAN Console, specifying the appropriate serial and partition number.
B. Telnet to the HMC on port 2301.
C. In ASMI, select "open shared console" for the desired partition.
D. Open a ssh connection to the HMC, use the "vtmenu" command.

문제 #2

A PCIe card in the CEO of a 16-core Power 740 server has failed. The customer has removed the cover from the machine.
What must be done to complete the replacement of the failed PCIe card?

A. Power off the domain in service tools Remove the failed card Install the new card Replace the cover Power on the domain
B. Remove the failed card Install the new card Replace the cover
C. Use the service action menu on the HMO to remove power from the slot Replace the failed card Complete the service action to power the slot back on Replace the cover
D. Replace the failed card Replace the cover Power-up the managed system Restart all partitions

문제 #3

An administrator is building a client IBM i partition to be used as a development environment. The client partition requires 210GB of disk space, which will be provided by the hosting IBM i LPAR.
On the hosting IBM i LPARI which disk configuration will provide the best performance to the client LPAR?

A. Six virtual 35GB disks across all physical disks in *SYSBAS.
B. One virtual 210GB disk across all physical disks in *SYSBAS.
C. One virtual 210GB disk in a separate ASP.
D. Two virtual 52.5GB disks *SYSBASI and two 52.5GB disks in an iASP.

문제 #4

A customer has a single partition Power 720 running IBM i with PowerVM Express, LAN Console, and extra disk and memory capacity.
Management wants a small IBM i partition added to the system for testing.
Which option supports the requirement with minimal disruption to production?

A. Implement VIO Server to host the test partition.
B. Create a guest IBM i partition on the existing partition.
C. Acquire an HMC and partition the system.
D. Implement VIO Serverto host both partitions as clients.

문제 #5

A customer is implementing a new POWER7 system that will run along with an older POWER5 system.
A new HMC has been purchased for the POWER7 system.
The older 7310-CR3 HMC for the POWER5 system will remain in service.
The customer wants the older 7310-CR3 provide back up to the new HMC.
What must be done prior to implementing the customer's requirements?

A. Upgrade the POWER5 system firmware to the same fix pack level that the POWER7 system is
running. Upgrade the 7310-CR3 to the latest version of HMC code.
Connect both systems normally to the 7310-CR3
B. Ensurethe POWER7 ESP is running in "Dual Mode"with the"Activated Level"setto supportthe
POWER7 system and the "Deferred Level"set to support the POWER5 system.
Connect the 731 O-CR3 with the "Deferred Level"password.
C. Consult the HMC / Firmware Supported Combinations chart to obtain the proper firmware/HMC
code levelsimplementthe firmware updates on the POWER5 and 7310-CR3 HMC first,
Connectthe 7310-CR3 to the POWER7 system.
D. Connect the new HMC to the POWER7 system and to the LAN.
Use the "Transmit Service Information"dialog on the new HMC to update the 7310-CR3 with the
new HMC code and firmware for the FSP.
Update the firmware on the POWER5 system and connect the new HMC.

질문과 대답: